SOLDA SKIWAXING CHART
SOLDA SKIWAXING CHART |
||||||||
| TEMPERATURES °C | AIR HUMIDITY % | TYPEOF SNOW | IRONTEMPERATURE °C | |||||
| SNOW | AIR | 0 - 30 | 30 - 60 | 50 - 80 | 50 - 100 | |||
| 0 / -1 | +5 /-4 | HC1 + Powerjet 5 |
F15 + Fluor 100 |
F31 + Fluor 100 |
F40 Special + Fluor Gel |
F40 Carbon + Fluor Gel |
MELTING SNOW |
115 - 125 |
| -2 / -6 | +2 / -9 | F31 + Fluor 100 | FALLING & NEW SNOW |
120 - 125 | ||||
| -2 / -10 | 0 / -13 | HC1 + Powerjet 1 |
F15 + HP04 |
F31 + HP04 |
F40 Special + HP04 |
F40 Carbon + HP04 |
PARTIALLY TRANSFORMED SNOW |
125 - 130 |
| -2 / -10 | 0 / -13 | HC1 + Powerjet 2 |
F15 + HP05 |
F31 + HP05 |
F40 Special + HP05 |
F40 Carbon + HP05 |
TRANSFORMED SNOW |
125 - 130 |
| -10 / -20 | -13 / -24 | HC1 + Powerjet 3 |
F15 + HP06 |
F31 + HP06 |
F40 Special + HP06 |
F40 Carbon + HP06 |
VERY COLD & ABRASIVE SNOW |
130 - 135 |
NOTE:
The best performances from skiwaxing are obtained when skiis have been stored for at least 6 hours in a
room with a temperature superior to 20°C.
The top performances are delivered if the ski bottom has been pre-heated at temperatures from 50 to 80°C.
- The STR powder (designed for territories blown by winds from the sea) is recommended for the same temperatures/
humidity as for HP04. - A first layer (directly in contact with the ski base) by S30 is recommended for a longer lasting of the skiwaxing.
- F40 Carbon are recommended for dirty snow.
- All SOLDA’ skiwaxes are mixable, in case a skiwaxing for more specific temperatures is desired.
- Transformed & artificial snow is the most frequent situation on man-made tracks and slopes.
- The powders HP04 Carbon, HP05 Carbon, S40 Carbon, designed for dirty snow, are recommended for the same
conditions as for HP04, HP05, S30 (designed for clean snow). - The MR powder, designed for Marathon races, is recommended for the same meteo conditions as for HP05.
ECO Products, ..in respect of the Environment
Links - Amici e Partner
Dr.Wax
News
TOP Racing products
